Husqvarna TS 354D 54 Inch 25 HP (Kohler) Lawn Tractor

• Kohler KT740 Engine:Provides clean, reliable power while consuming less fuel. Quickly and easily cut through thick, wet grass.
• ClearCut Fabricated Cutting Deck:Designed with 10 gauge steel construction and welded reinforcement strips for increased durability.
• Electric Blade Engagement:Easily pull a switch on the control panel to engage the cutting blades.
• Pedal-Operated Hydrostatic Transmission:Manage the speed and direction with pedals, allowing you to keep your hands on the wheel.
• Hydrostatic Transmission w/ Locking Differential:Commercial grade, pedal-operated transmission provides variable speed and offers increased traction on slopes and wet surfaces.
• Armrests:More comfort while mowing.
• Cast Iron Front Axle:Provides superior stability and balance.
• Cast Iron Spindle Housings:Built to last and feature sealed ball bearings.
• Cruise Control:Maintain a constant speed, even on uneven and rough terrain.
• Easy Access Fuel Cap:Refuel quickly and easily without having to open the engine hood.
• Large Tires:Improved traction and reduces damage to the ground.
• Steel Chassis:Built for high durability.
• Transparent Fuel Indicator:Easy to check fuel level.
• Deck Wash Port:Connect a hose to the deck wash port to clean underneath the deck easily.
• Ergonomic Steering Wheel:Ergonomically designed and angled comfortably in an ideal operator’s position.
• Cutting Height Adjustment:Fender-mounted deck lever is spring assisted for easy use.
• Headlights:Easier to operate in the dark.
• Reverse Operating System:The cutting blades are disengaged while driving in reverse.
• Safety Switch:Engine and cutting deck are turned off automatically if the driver leaves the seat.

Technical Specs for the Husqvarna TS 354D

Engine
Engine Brand : Kohler
Power : 25 HP
Starting System : 12-Volt Key Start
Engine : 4-Cycle
Fuel Capacity : 4 Gallons
Cylinders : 2 Cylinders
Oil Filter : Yes

Cutting Deck
Cutting Methods : 3-in-1 Rear/Bag/Mulch
Cutting Deck Material : 10-Gauge Welded
Spindles : Ductile Cast Iron
Blades : 3
Cutting Height Steps : 7
Cutting Height (min-max) : 1.5 – 4 in.
Deck Lift System : Manual Hand Operated
Blade Engagement : PTO Electric

Drive System
Speed : Variable
Speed Forward (min, max) : 0 – 5.5 mph
Speed Reverse (min, max) : 0 – 2.1 mph
Transmission Type : Hydrostatic

Dimensions
Length (in.) : 71.3 in.
Width (in.) : 62 in.
Height (in.) : 42.5 in.
Weight (lbs.) : 660 lbs.